Can't upload STP file. Stating GovConnect details don't match... but they do!

Jade
Jade Member Posts: 9
edited April 2020 in Reckon Accounts (Desktop)
I'm trying to upload my STP file and keep getting the following message "Invalid Company Information provided. Please check your ABN/WPN, Company Name and Branch number match those set in Reckon GovConnect Single Touch Payroll for your company." I have checked repeatedly and all details match. How do I frix this? What is the next step?

Comments

  • Teagan Uttridge_9709416
    Teagan Uttridge_9709416 Member Posts: 2
    edited July 2018
    I had this issue under company information in reckon the legal name and and company name need to match exactly as the company name in gov connect do. check that 
  • Janelle Forrester
    Janelle Forrester Member Posts: 1
    edited July 2018
    I'm having same issue and getting same message Jade. Have tried to find somewhere in the Reckon Portal to update company details but cant find anywhere that allows me.
  • Rav
    Rav Administrator, Reckon Staff Posts: 15,305 Community Manager Community Manager
    edited August 2018
    Teagan is exactly right on this, its also case sensitive so please be aware of that.

    There's info on this here -

    Invalid Company Information error” when submitting pay information via Govconnect STP


    ℹ️ Stay up to date with important news & announcements for your Reckon software! Click HERE for more info.

  • Jade
    Jade Member Posts: 9
    edited July 2018
    Thank you all! I did not realise that the Company Name and Legal Name had to match. I only had 'Incorporated' on the end of our Legal Name.
    You would think that the Company Name would be the field to record your Trading Name...why have two fields if they have to be identical??
  • John G
    John G Reckon Staff Posts: 1,570 Reckon Staff
    edited April 2020
    Hi Jade,

    With STP the "name driver" is the name that appears with your ABN on an ABN Lookup (the official registered name of the company). Your Legal name in your company file must match the ABN Lookup name exactly (and yes it is case sensitive) so it passes the checks STP does to ensure it has the right file and account.  The Company Name field at the top of the Company Information screen can be anything you like - like your trading name. 

    Hope this clarifies the issue.  


    regards,
    John. 
  • Glynis_9713210
    Glynis_9713210 Member Posts: 4
    edited August 2018

    This is really bad news for us.  Our legal name is 125 characters long.  Maximum field length for the Legal Name in Reckon Accounts is 58 characters.  It is impossible for us to match the ATO/ABN Lookup name exactly.

    To add to this problem - our ABA file will now generate with the legal name in the ABA file header and lodgement references for our employees because Reckon uses the data in the legal name to populate these items.  Our legal name is not our bank account name.

    Very concerned about what will happen when we try to upload our payroll on Wednesday both to GovConnect STP and to our bank.

    Does anyone have a solution?

  • Robyn Kelly (Partner)
    Robyn Kelly (Partner) Accredited Partner Posts: 473 Accredited Partner Accredited Partner
    edited September 2019
    Also check BRANCH NO if you are still having issues - might need to add that to the KB?

    Regards, Robyn Kelly
  • Brooke
    Brooke Member Posts: 19
    edited June 2019
    I'm having the same issue - I have matched the Entity name listed on ABN lookup to our Reckon company information (both under company name and legal name), as well as in Reckon portal.  It's still not working.....
  • Kate Bidgood
    Kate Bidgood Member Posts: 4
    edited September 2019
    I'm having the same problem in Payroll Premier.  I have copied and pasted the name from the ABN lookup into the GovConnect portal as well as the Company and Trading name sections of the Company Information section within the program and am still getting the same error message.
  • Kellye Rowe
    Kellye Rowe Member Posts: 2
    edited September 2019
    Same.  I have also spent almost 2 hours on hold waiting for Reckon Technical Support while I have copied and pasted the name from the ABN lookup into the GovConnect portal & Company /Trading name sections of the Company Information section within Payroll Premier... Still not working...
  • Kellye Rowe
    Kellye Rowe Member Posts: 2
    edited July 2018
    Did you find a solution Kate?
  • Robyn Kelly (Partner)
    Robyn Kelly (Partner) Accredited Partner Posts: 473 Accredited Partner Accredited Partner
    edited July 2018
    Kellye, when you created your Portal STP tile and verified your ABN - did you include a Branch No?  If you don't remember I suspect not.  Next step is to check in your Company Information in Reckon file - is there a branch number there?  If so delete the branch number and try creating the STP export file and upload again.
    If you did include a branch no make sure it's a 3 digit number - either 001 or 002 usually.  Again make sure the same number is in the Company Information screen.
    Hope that helps?
    Regards, Robyn Kelly
  • Robyn Kelly (Partner)
    Robyn Kelly (Partner) Accredited Partner Posts: 473 Accredited Partner Accredited Partner
    edited July 2018
    Kate, when you created your Portal STP tile and verified your ABN - did you include a Branch No?  If you don't remember I suspect not.  Next step is to check in your Company Information in Reckon file - is there a branch number there?  If so delete the branch number and try creating the STP export file and upload again.
    If you did include a branch no make sure it's a 3 digit number - either 001 or 002 usually.  Again make sure the same number is in the Company Information screen.
    Hope that helps?
    Regards, Robyn Kelly
  • mpgioia
    mpgioia Member Posts: 1
    edited July 2018
    Can you post a screenshot (redacted at that obviously...) @'Robyn Kelly' where the branch no is in the company information section of the reckon file.. I don't see a field for it anywhere..
  • Brooke
    Brooke Member Posts: 19
    edited July 2018
    I have included a branch number under company information in Reckon, following the ABN of '001'. I have also tried deleting the branch number in Reckon and leaving that field blank.  Still no luck.
  • Kate Bidgood
    Kate Bidgood Member Posts: 4
    edited July 2018
    Thank You Robyn! Deleting the branch number in the payroll program fixed the problem.
  • Kate Bidgood
    Kate Bidgood Member Posts: 4
    edited July 2018
    @mpgioia if you haven't located it yet, I found the branch number under the preferences section rather than the company information.  Go to Preferences; Files then delete the number in the Branch No field under the Empdupe and SAFF heading.  This is what worked for me, hope it works for you as well.
  • Robyn Kelly (Partner)
    Robyn Kelly (Partner) Accredited Partner Posts: 473 Accredited Partner Accredited Partner
    edited July 2018
    Sounds like it depends which program you are using mpgioia - which Reckon program are you using please?
  • John G
    John G Reckon Staff Posts: 1,570 Reckon Staff
    edited July 2018
    Hi Everyone,

    Please see this article on this issue which we recently prepared


    regards,
    John
  • [Deleted User]
    [Deleted User] Posts: 0
    edited July 2018
    Where do you change the company information in the govconnect portal I need to check that there is no GST branch number and try and get the names the same?  Also Im with hosted and the portal is saying I have no subscriptions.  We are a unit trust so trying to get the correct name is driving me crazy.
  • Robyn Kelly (Partner)
    Robyn Kelly (Partner) Accredited Partner Posts: 473 Accredited Partner Accredited Partner
    edited July 2018
    Shelley you can't change it in the GovConnect Portal just yet, you need to change your Reckon data file to match the GovConnect Portal tile.  See John's message below with the knowledge base article link.
    Regards, Robyn Kelly
  • [Deleted User]
    [Deleted User] Posts: 0
    edited July 2018
    okay thanks,  no wonder I couldnt find where to change it.  I have managed to successfully submit one payroll.  Now to the other company. 

  • Kathy Pang
    Kathy Pang Member Posts: 1
    edited May 2019
    Thank you everyone for writing their issues on this blog. After multiple attempts lodging STP I’ve finally successfully uploaded and submitted our first STP. - checked ABN Lookup Name - went into reckon, company, company information - corrected company name and legal name exactly how it is on ABN Lookup and took note it is Case sensitive spaces and dots (we had dots after pty and ltd), blank for branch (didn’t know what it was/don’t have one) - went back to employees, process single touch payroll, saved a new file - signed in to Reckon GovConnect and corrected the name and address exactly the same - uploaded the file and pressed Submit and finally lodged successfully Thank you to everyone who put in their bit of information which helped me through it. Much appreciated. Hope all of you succeed too. Best Regards Kathy
  • jim little
    jim little Member Posts: 1
    edited July 2018
    Why is it that a simple matching process is so hard. Why can't Reckon display the correct name on the screen. I have tried everything and I am stumped. Please reckon display the name on the screen and let's stop the guessing game. :( 
  • Rav
    Rav Administrator, Reckon Staff Posts: 15,305 Community Manager Community Manager
    edited July 2018
    Hi Jim,
    Did you take a look at the help article in the earlier posts from myself and and John G.
    It provides all the info you need to know in regard to the format and matching requirements for the legal name.


    ℹ️ Stay up to date with important news & announcements for your Reckon software! Click HERE for more info.

  • [Deleted User]
    [Deleted User] Posts: 0
    edited July 2018
    Try all Uppercase as this how our names appear in the ATO tax portal.  It worked for both my companies. 

  • Maureen Hallen
    Maureen Hallen Member Posts: 15
    edited July 2018
    Thank you all so much for all your comments, finally managed to upload first STP file after trying several of the above hints, I think my issue was leaving the branch number in the company info in Reckon desktop, once i removed this it uploaded without issue.
  • Leanne_7663246
    Leanne_7663246 Member Posts: 109 ✭✭
    edited July 2018
    Hi, Did you find a solution for your problem Glynis, I have the same problem our company name is to long as well.
  • Glynis_9713210
    Glynis_9713210 Member Posts: 4
    edited July 2018

    Hi Leanne

    To successfully create and upload an STP file when the legal name is too long

    1. Edit the name in Reckon portal so that it is no longer than the maximum characters (59 characters) and also edit the name in Caps Lock.

    2. Copy and paste the edited Reckon portal name into the Reckon Company Info Legal name field.

    3. Re-create the STP file and upload.

    Hope this helps

    Glynis

  • Kim Phung Nguyen
    Kim Phung Nguyen Member Posts: 5
    edited April 2020
    Hi John

    I tried to update the legal name exactly like in the ABN lookup but I also failed to upload the STP.
    Really frustrated and I don't know who to call to get support!