Welcome to Quicken Accounts

Rob_7858210
Rob_7858210 Member Posts: 6
I have just installed Reckon Accounts Personal Plus 2015 on to a new machine and every time I go into Quicken I get the message "Welcome to Quicken Accounts", then get asked if I am already a Reckon Accounts user and then I have to select "open file loaded on this computer".  This is very frustrating as it takes three screens to get into the program.

I backed up the data files from the old computer and then restored them to this computer.

I am running Reckon Accounts Personal Plus 2015 on a PC with Windows 8.1

Any assistance will be appreciated.

Comments

  • Fred_7639421
    Fred_7639421 Member Posts: 37 ✭✭
    edited November 2015
    Try this. You should have
    C:\Users\YourName\Documents\Quicken\Data Set - consisting of some or all of these extentions hcx/idx/qel/qin/qph/qdf. Double click on the QDF file and it should open Quicken. Make some sort of temporary change to your account(s) - close quicken and restart computer. Hopefully it will now start normally.
    Regards
  • Steve Deegan
    Steve Deegan Member Posts: 1
    edited November 2015

    Hi Rob ,

    I have the same issue with "Welcome to Reckon Accounts" & the extra steps you have to go to in starting the program

    I am running Home & Business 2015 ( but no real difference to RPP )  but a bit complicated in that my wife & I each have a licensed copy on our own PC's and the data file resides  on  her PC .  Only one of us can be using the program at any given time but we work around that OK.  When she opens the program on her  PC it goes straight to the password entry box  ie   no "Welcome to Reckon Accounts "

    When I want to be running Home & Business I always get "Welcome to Reckon Accounts"  etc & have go through the steps  each time over our home network to tell Reckon H & B where to find the  .QDF  data file ( On my wife's PC Hard Drive )    Its a bit annoying but I can live with it  as I ACCEPT Personal Plus/H& B are  designed as stand alone programs & not running over a network ?

    There has been discussions on this previously and long file names  greater than 8 characters were mentioned as a possible cause for the "Welcome " screen problem .  You could try this Rob  but I reduced my file name to 5 characters before the .QDF & the problem still remains

    Steve



  • Bjorn
    Bjorn Member Posts: 8
    edited November 2015
    Hi Rob, I had this issue also and the length of the filename was the problem, although never before! I changed the filename to 7 characters and all was fixed! Curious but true! Bjorn
  • Alex Tan
    Alex Tan Member Posts: 83
    edited February 2016
    Hi Rob,

    As mentioned above you must have the datafile and your Reckon Accounts software on the same physical hard drive as this can cause problems of our software trying to locate your file on another or external hard drive.

    You can also try to run the software as an administrator to see if it fixes the issue.
    • Close Reckon Accounts 2015
    • Right click on your Reckon Accounts 2015 icon
    • Find the option for Properties
    • Go to the Compatibility tab
    • Tick the checkbox that says to "Run this software as an administrator"
    • Apply/OK
    • Open Reckon Accounts 2015 - you may need to browse to the file again
    • Once file is opened, close Reckon/Open it again and test to see if it is asking you the same question.
    Hope this helps.

    Kind regards,
    Alex
  • Rob_7858210
    Rob_7858210 Member Posts: 6
    edited November 2015
    Thank you all for your hints and tips.

    I have my program on C: and my data on E:  and found that if I create a shortcut from each data file to the desktop I can just click on one of those and Quicken will open correctly.  Once I have the program open I can then change to another data file within Quicken without any problem.

    I have not installed RPP 2016 yet, so that may be another kettle of fish!!
  • Rob_7858210
    Rob_7858210 Member Posts: 6
    edited November 2015
    Thanks for your comments.  I now have RPP 2016 version and renamed my data files by changing the names to delete the date that was appended to the data file when I backed it up and this got rid of the "Welcome to Quicken Accounts" screen.  However I still get the User Account Control box popping up, but it looks as though I will have to live with this even though I have followed the instructions from Alex above.