Error installing Reckon Accounts 2019 on Windows 10: Error 1920.Service QuickBooks Database Manager
Brand new desktop computer. Trying to install Reckon accounts Premier 2019 - upgrade onto Windows 10. Error 1920.Service QuickBooks Database Manager Serviced failed to start.
Older version of software on another (XP) computer. Cannot get any solutions from community page and Reckon not taking support calls.
Comments
-
This content has been removed.
-
Hi Helen,
I am just returning to Reckon Desktop so it's been a few years in between, but in the past I was told by my software Reckon guru that if you need to update from an older version you need to update year by year, not jump multiple years in the one upgrade, as Reckon just doesn't like it. When we did it that way there wasn't a problem. I am also referring to the days when upgrades and new versions of the software came as CD's only so I am showing my age here!
Good Luck with this.
Di1 -
Thanks Di. Yes, it SHOULD have been that easy. As it turns out, after 1.25 hrs on hold, a Reckon person found some obscure back place where certain computer options were not correctly ticked / selected. I would NEVER have found these and they are not part of the normal Reckon upgrade process. But all good now. Tks for your reply
0 -
This content has been removed.
-
Ok, so the solution for Windows 10 is ...
Control Panel > Programs and Features > Turn Windows features on or off
If the check boxes for .NET Framework 3.5 & 4.7 are not ticked it means they are not fully active. You need to open the sub directories on each and tick them to activate / fully tick the feature. Then, voila, the upgrade will work!
4 -
This content has been removed.
-
Thank you Helen for posting this solution, I have been trying to install RA2019 for hours now and this was the solution that finally worked!
2 -
I'm glad the information has been helpful; and hopefully others will get the benefit too. Tks for your post.0 -
Hi I have exactly the same problem will follow your instructions Helen Thankyou Chris0 -
Thank you Helen. I have had the same issue Do I have to go and untick in control panel? Or leave it now to the changes?0
-
Thankyou Helen - this resolved my issue.
For reference, once windows features settings are changed the computer needs to complete a restart. I hadn't exited the Install wizard for Reckon QB, so I selected don't restart - and first went and cancelled the Install Wizard which rolled back the installation.
I then went back to the windows features screen by typing "windows features" in the search box on the bottom task bar next to the windows icon - then clicked on the "turn windows features on or off" icon.
Once in this screen my .NET Framework 3.5 check box was blank, and my .NET Framework 4.7 was filled in black colour. When I expanded both there were selections for each that were unfilled. I clicked a tick into all boxes for both selections, and a tick appear in the box next to the parent once all selections were complete.
I then clicked ok and allowed the computer to restart.
When the computer had restarted, I found the QB files which were saved from my incomplete install from before the reboot (which were in my C:/Temp folder), and clicked on the Setup application file. This restarted the installation, which required me to re-enter my installation key, but the install only needed to install the additional files it missed on the original process so was quickly up to the install wizard stage and progressed through from there without issues.
Thanks again for posting your findings - I am not very I.T. savy and rely on people such as you sharing knowledge to resolve issues. Very much appreciated.
1 -
Does anyone every get a resolution from this site. Simple question; convoluted answers. OR irrelevant answers. Trevor Chivell
0 -
Hi Helen Case, I also have been using QuickBooks since 1996. BUT I have nothing to upgrade on this new computer. Virgin computer will not install Recon Accounts 2019 as a new installation. Error 1920. Why? Any thoughts. Trevor Chivell1
-
This content has been removed.
-
This content has been removed.
-
Have you still checked that via Control Panel > Programs and Features > Turn Windows features on or off
that the check boxes for .NET Framework 3.5 & 4.7 are ticked? If not, it means they are not fully active. You need to open the sub directories on each and tick them to activate / fully tick the feature. Apart from that I am not much help
5 -
Hi Kevin
I'm also having some problems installing Reckon Accounts Premier 2019 on a Dell XPS Notebook running Windows 10 - could I give you a call to ask you a couple of questions1 -
This content has been removed.
-
Helen you are a genius thank you!!!1
-
Hi Kevin
I resolved the problem by letting Windows 10 do a disk cleanup before trying again
Took about 4 hours for the cleanup and then relaunched setup and it went through perfectly
I broadned the problem from being QB related after I noticed a Dell update produced the exact same problem0 -
I just had the same problem and found these possible solutions. I followed Helen's directions and tried again. It loaded properly. Thank you :-)0
-
I had the same problem on fresh install of Windows 10. You will need to d/l & install Microsoft .NET Framework 3.5 Service Pack 1 and the Reckon DB service will be able to register.0
-
This content has been removed.
-
Helen, it's perfect! Thanks a lot!0
-
Helen's suggestion solved the problem for me, thanks Helen
0 -
during the installation of my trial program, I had a popup rear it's ugly head with the following message:
Error 1920. Service Quickbooks Database Manager Service (QBCFMonitorService) failed to start
here we are 30 Sept 2020 and this issue still persists...
all thanks go to Helen Case who provided the workaround for this same installation problem ๐
let's hope a fix to the installation (or at the very least, a mention in the installation documentation) makes it's way to the surface soon ๐
0 -
This content has been removed.
-
This content has been removed.
-
Yes. You are correct and I stand happily corrected ๐
I was referring to the Installation & Upgrade Guide Installation & Upgrade Guide https://help.reckon.com/article/pajb161jmi#installing_reckon_accounts at the time I was downloading and installing the trial software but when I didn't see it on that main page, I immediately went to the forums as they've proved insightful in the past which is where I found the post I referred to...
After getting your reply this morning, I retraced my steps to include a more thorough search of the documentation which included investigating that sidebar/contents menu on the left; namely the Troubleshooting - Reckon Accounts drop down menu, where a search (ctrl + f) in that sidebar (itself) brought me to the link you reference, which, if I had my wits about me at the time, I would have discovered for myself ๐คจ
Thanks to you and Rav and the forum community, I've been able to get my bookkeeping needs sorted. No doubt I'll be seeking guidance in the future as I come to grips with this upgrade but from my first investigations of the Trial Company and a resto of an old company file I no longer use that covered the period off 2002 - 2007, all that data seemed intact and usable so I'm chuffed at this point with my decision to make the jump to the Reckon Accounts Plus Desktop Software ๐
1 -
I had the same problem with a brand new installation of Reckon Accounts 2021 stalling near the end but not getting past the Error 1920 box. I followed Helen's fix with good results. I am doing this in 2022, loading a new installation onto a fresh install of Windows 10, and found that the solution was listed in the above Community logs of 2019. Hopefully this solution will be put front and centre in the downloading problems rather than the current offering which had a number of futile steps, for me at least.
0 -
This content has been removed.
